AMSOIL 100% Synthetic V-Twin Transmission Fluid

AMSOIL V-Twin Transmission Fluid

AMSOIL Synthetic V-Twin Transmission Fluid is specifically designed for bikers who prefer a dedicated transmission fluid over a multi-use lubricant. Its frictional properties deliver smooth shifts and it helps quiet transmission noise, letting riders focus on enjoying the ride. AMSOIL Synthetic V-Twin Transmission Fluid is Warranty Secure™ and will not void your motorcycle’s warranty. It is a cost-effective, high-performance alternative to original equipment manufacturer (OEM) fluids.

‍

AMSOIL V-Twin Synthetic Transmission Fluid

Protects against gear and bearing wear
Delivers smooth shifts
Helps eliminate loud thunks and gear noise

Promotes Quiet Operation

AMSOIL Synthetic V-Twin Transmission Fluid forms a durable oil film on bearings and gears, helping to dampen loud thunks when shifting and reduce gear noise.

Protects Against Gear and Bearing Wear

Extreme pressures between gear teeth can shear inferior transmission fluids, reducing viscosity and compromising wear protection. AMSOIL Synthetic V-Twin Transmission Fluid resists viscosity loss due to shear and withstands extreme heat for excellent wear protection. Its robust molecules provide film strength to protect against damage from shock loading, while its extreme-pressure additives deliver additional protection against wear.

Delivers Smooth Shifts

AMSOIL Synthetic V-Twin Transmission Fluid’s finely tuned viscometrics and frictional properties provide smooth shifts, helping riders avoid missed shifts for crisp acceleration through each gear. It provides riders confidence that their transmission is going to respond as intended for an improved ride.

TYPICAL TECHNICAL PROPERTIES

AMSOIL Synthetic V-Twin Transmission Fluid (MVT)

‍

Kinematic Viscosity @ 100°C, cSt (ASTM D445)	20.7
Kinematic Viscosity @ 40°C, cSt (ASTM D445)	190.3
Viscosity Index (ASTM D2270)	127
Pour Point, °C (°F) (ASTM D97)	-40(-40)
Flash Point, °C (°F) (ASTM D92)	228(442)
Fire Point, °C (°F) (ASTM D92)	242(468)
Four-Ball Wear Test (ASTM D4172 @ 40 kgf, 150°C, 1800 rpm, 1hr), Scar, mm	0.55
NOACK Volatility, % weight loss (g/100g) (ASTM D5800)	8.43
Foam (ASTM D892, Sequence I, II and III)	0/0/0

What weight is AMSOIL V-Twin Transmission Fluid?

Given these specs, AMSOIL V-Twin Transmission Fluid is most likely to be classified as an SAE 50 weight oil or possibly an SAE 75W-90 or SAE 80W-90 transmission fluid. The high viscosity at 100°C and the very high viscosity at 40°C suggest a heavier weight oil suitable for high-temperature applications.

However, it's important to note that this classification system is typically used for engine oils, and transmission fluids often use different classification systems (like Dexron or Mercon for automatic transmission fluids, or gear oil grades for manual transmissions).

The pour point of -40°C indicates good low-temperature performance, which is a characteristic of many modern synthetic or semi-synthetic lubricants.

APPLICATIONS

AMSOIL V-Twin Transmission Fluid is engineered for use in Harley Davidson, Triumph and pre-2013 INDIAN bikes.

RECOMMENDATIONS

AMSOIL Synthetic V-Twin Transmission Fluid is recommended for up to 20,000 miles or one year, whichever comes first.

WARRANTY SECURE™️

AMSOIL V-Twin Synthetic Transmission Fluid is Warranty Secure, keeping your factory warranty intact. AMSOIL V-Twin Synthetic Transmission Fluid is a high-performance replacement for vehicle manufacturer-branded products and is also backed by the AMSOIL Limited Warranty (G1363). For details, visit www.amsoil.com/warrantysecure.

HEALTH & SAFETY

This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Safety Data Sheet (SDS). An SDS is available at AMSOIL.com or upon request at (715) 392-7101. Keep Out of Reach of Children. Don’t pollute. Return used oil to collection centers.

‍